Support

Email support@sensorview.nz with your question, or the barrier number and what it is doing. The manuals and guides cover assembly and the app.

How do the barriers talk to each other?

Each arm has a controller. The controllers talk to each other by radio, and a monitor in the machine picks up every barrier by radio too. Your phone connects to the monitor by Bluetooth.

Do I need mobile coverage?

No. The radio link and the Bluetooth link work without mobile coverage, and so does the app.

What does the app show?

A tile for each barrier with its number, whether it is up or down, its radio signal strength and the battery level of its controllers. If a barrier stops reporting, the app shows No Signal and can sound an alert. More on the app page.

How are the controllers powered?

Barrier controllers have batteries inside, with a battery management system, and charge over USB-C. A 240 V charger and a USB charging cable are available. Switch a controller off before charging it: the product manual has the charging steps. The vehicle monitor runs from a 12–24 V supply instead.

Can I add more barriers?

Yes. Add an additional barrier arms set or another barrier controller to the same system. Controllers can be set up to do different jobs, such as working as a repeater.

How do I get more range?

Fit a long-range antenna, or set a controller up as a repeater between the barrier and the machine. Ask us about your site.

Where are the manual and assembly guides?

The product manual (PDF) covers setting up, using and looking after the system. The barrierView v1 and barrierView v2 assembly guides each have five short videos and a printable PDF. All of them are on Manuals and guides.

Something broken?

Every part is sold separately in products and parts, from pins and flags to cases and controllers. If you are not sure which part you need, send us a photo.